Conventional Castables CAST GUN PUMPABLE SHOTCRETE APPLIED
BY HAND
DETAILS
SPARCAST 25MSDS    45% Alumina; Use Limit 2500; Cast Density 115.0
SPARCAST 25C     45% Alumina; Shock Resistant; Use Limit 2500; Cast Density 125.0
SPARCAST 25IMSDS    40% Alumina; Insulating; Multi-Use; Use Limit 2500; Cast Density 118.0; Gun Density 122.5
SPARCAST 26LIMSDS45% Alumina; Low Iron; Multi-Use; Use Limit 2600; Cast Density 116.5; Gun Density 121.0
SPARCAST 28MSDS    50% Alumina; Use Limit 2800; Cast Density 131.0
SPARCAST 28 ARKMSDS    48% Alumina; Use limit 2800; Cast Density 127
SPARCAST 28 C/G    50% Alumina; cast/gun; 120 lbs/ft3
SPARCAST 28ESMSDS    50% Alumina; Use Limit 2800; Cast Density 130.0
SPARCAST 30MSDS    60% Alumina; Use Limit 3100; Cast Density 135.0
SPARCAST 30CMSDS    60% Alumina; Shock Resistant; Use Limit 3100; Cast Density 135.0
SPARCAST 30LMSDS    60% Alumina; Low Iron; Use Limit 3000; Cast Density 135.0
SPARCAST 30QSMSDS    60% Alumina; Quick Setting; Use Limit 3000; Cast Density 135.0;
SPARCAST 32     80% Alumina; Use Limit 3200; Cast Density 146.0
SPARCAST 90MSDS    90% Alumina; Use Limit 3200; Cast Density 148.0
SPARCAST 94CMSDS    Low Iron for reducing environ.; Use Limit 3400; Cast Density 168.5
SPARCAST 97MSDS    95% Alumina; Use Limit 3400; Cast Density 165.0
SPARCAST 97 CRFMSDS    97% alumina castable designed for handling high temperatures not suitable for lesser grade castables.
SPARCAST 97FMSDS    95% Alumina; Fine Grained; Use Limit 3400; Cast Density 165.0
SPARCAST ES-C 55% Alumina; 7-9cc loss; Use Limit 2700; Cast Density 130;
 
Insulating Castables CAST GUN PUMPABLE SHOTCRETE APPLIED
BY HAND
DETAILS
SPARCAST 110 GMSDS     High strength, medium, abrasion resistant gun mix designed for applications where higher sterngth and good insulation is needed.
SPARCAST 110 PMSDS  High strength, medium weight, abrasion resistant castable designed to be installed by pumping.  Provides high strangth and good insulation.
SPARCAST 110CMSDS    <15cc Loss; Use Limit 2500; Cast Density 111.0
SPARLITE 25MSDS   Best insulator; Use Limit 2000; Cast Density 25.5; Gun Density 34.0
SPARLITE 28GMSDS    Low Iron; Use Limit 2800; Cast Density 87.5
SPARLITE 3000    
3000° F, insulating castable.  Used primarily in soaking pit covers because of its light weight and excellent insulation characteristics. This product can be gunned, cast, or extruded.
SPARLITE 35MSDS   Excellent Gunning Characteristics; Use Limit 2000; Cast Density 32.5; Gun Density 35.0;
SPARLITE 35PMSDS  35 pcf pumpable; Use Limit 2000; Cast Density 32.5
SPARLITE 50MSDS   Use Limit 2200; Cast Density 50.0; Gun Density 62.5
SPARLITE 55MSDS   Use Limit 2200; Cast Density 52.5; Gun Density 65.0
SPARLITE 55HS    High Strength; Use Limit 2300; Cast Density 57.5; Gun Density 65.0
SPARLITE 60MSDS   Excellent Strength; Use Limit 2400; Cast Density 60.0; Gun Density 75.0
SPARLITE 60 LIMSDS   Excellent Gunning Characteristics; Use Limit 2400; Cast Density 60.0; Gun Density 75.0
SPARLITE 60P   Pumpable; Use Limit 2200; Cast Density 62.5
SPARLITE 60P LIMSDS  Low Iron; Use Limit 2500; Cast Density 62.5
SPARLITE 75 HSMSDS   A high strength, medium weight insulating castable suitable for hot face exposure as well as being a good insulator.
SPARLITE 80MSDS   Use Limit 2500; Cast Density 75.0; Gun Density 94.0
SPARLITE 80HSMSDS   High Strength; Use Limit 2500; Cast Density 82.5; Gun Density 94.0
SPARLITE 80P LIMSDS  Low Iron; Use Limit 2400; Cast Density 75.0
SPARLITE 85 PMSDS  High strength lightweight insulating castable designed for pumpcast or shotcrete applications.
SPARLITE 90LIMSDSLow Iron; Use Limit 2600; Cast Density 89.0
SPARLITE 90P LI   Low Iron; Use Limit 2600; Cast Density 88.0
 
Low Cement Castables CAST GUN PUMPABLE SHOTCRETE APPLIED
BY HAND
DETAILS
SPARBOND 60     

High strength, low-cement bonded refractory designed especially for bonding to existing materials.

 
SPARCAST LC 28MSDS    55% Alumina Low Cement; Use Limit 2900; Cast Density 147.5
SPARCAST LC 30MSDS    60% Alumina Low Cement; Use Limit 3100; Cast Density 162.5
SPARCAST LC 30 A     SPARCAST LC 30 A is a high purity, low cement, vibrating castable. This specially designed product is contains Andalusite to aid in thermal shock resistance. This product is also non-wetting.
SPARCAST LC 30ZRMSDS    52% Alumina + Zircon Additions; Use Limit 3100; Cast Density 162.5
SPARCAST LC 32MSDS    70% Alumina; High Mullite Content; Use Limit 3200; Cast Density 175.0
SPARCAST LC 32 ALMSDS    Aluminum Contact; Use Limit 3200; Cast Density 170.0
SPARCAST LC 32BMSDS    85% Alumina; Bauxite Based; Use Limit 3200; Cast Density 175.0
SPARCAST LC 32B ALMSDS    Aluminum Contact; Use Limit 3200; Cast Density 175.0
SPARCAST LC 90SMSDS    70% Alumina + SiC Additions; Use Limit 3100; Cast Density 185.0
SPARCAST LC 92SMSDS    87% Alumina + SiC Additions; Use Limit 3200; Cast Density 190.0
SPARCAST LC 95MSDS    95% Alumina Low Cement; Use Limit 3300; Cast Density 210.0
SPARCAST LC 97     97% Alumina Low Cement; Use Limit 3300; Cast Density 210.0
SPARCAST LC 97XMSDS    93% Alumina + 5% Cr2O3; Use Limit 3300; Cast Density 210.0
SPARCAST LC 99MSDS    95% Alumina + Spinel; Use Limit 3300; Cast Density 200.0
SPARCAST LC 99XMSDS    Cr2O3 & Spinel Additions; Use Limit 3300; Cast Density 200.0
SPARCON 28PMSDS  45% Alumina; 6-8cc Loss; Use Limit 2800; Cast Density 147.5
SPARCON 30MSDS    50% Alumina; 6-8cc Loss; Use Limit 3000; Cast Density 144.5
SPARCON 30HPMSDS    50% Alumina; <8cc Loss; Use Limit 3000; Cast Density 147.0
SPARCON 30PMSDS  50% Alumina; 6-8cc Loss; Use Limit 3000; Cast Density 157.5
SPARCON 31MSDS    60% Alumina; 4-6cc Loss; Use Limit 3100; Cast Density 165.0
SPARCON 31PMSDS  60% Alumina; 4-6cc Loss; Use Limit 3000; Cast Density 157.5
SPARCON 32MSDS    75% Alumina; 4-6cc Loss; Use Limit 3200; Cast Density 170.0
SPARCON 32-80MSDS    80% Alumina; <3cc Loss; Use Limit 3200; Cast Density 177.0
SPARCON 32-80HPMSDS    80% Alumina; <3cc Loss; Use Limit 3200; Cast Density 170.0
SPARCON 32C   Coarse Grain; 3-5cc Loss; Use Limit 3200; Cast Density 170.0
SPARCON 32PMSDS  75% Alumina; 4-6cc Loss; Use Limit 3200; Cast Density 170.0
SPARCON 60-25MSDS    25% SiC; 4-6cc Loss; Use Limit 2800; Cast Density 174.5
SPARCON 60FS PMSDS  Thermal Shock; Fused Silica; Use Limit 2000; Cast Density 130.5
SPARCON 60SC HP     60% SiC; 4-6cc Loss; Use Limit 2700; Cast Density 160.0
SPARCON 60SC PMSDS 60% SiC; 3-4cc Loss; Use Limit 2700; Cast Density 165.0
SPARCON 70SC PMSDS  70% SiC; 3.9cc Loss; Use Limit 2700; Cast Density 165.8
SPARCON 80SC HPMSDS    80% SiC; 5-6cc Loss; Use Limit 2800; Cast Density 159.0
SPARCON 80SC PMSDS  80% SiC; 5-6cc Loss; Use Limit 2800; Cast Density 158.0
SPARCON 85ZMSDS    Zircon Castable; Use Limit 2900; Cast Density 208.0
SPARCON 99MSDS    95% Alumina + Spinel; Use Limit 3300; Cast Density 200.0
SPARCON APMSDS  Thermal Shock; Andalusite; Use Limit 3000; Cast Density 160.0
SPARCON AZSPMSDS  Fused AZS Grain; Use Limit 2800; Cast Density 185.0
SPARCON ZPMSDS  Zircon Additions; Use Limit 3100; Cast Density 157.5
SPARKIL 001 ACTIVATORMSDS    

Binder for use in Shotcrete applications.

 
Free Flowing Castables CAST GUN PUMPABLE SHOTCRETE APPLIED
BY HAND
DETAILS
SPARCAST 110 FF LIMSDS  Insulating; <13cc Loss; Use Limit 2500; Cast Density 110.0
SPARCAST 25 AL FFMSDS  Aluminum Contact; Use Limit 2500; Cast Density 125.0
SPARCAST LC 28 FFMSDS  55% Alumina Low Cement; Use Limit 2900; Cast Density 147.5
SPARCAST LC 30 FFMSDS  60-65% Alumina Low Cement; Use Limit 3100; Cast Density 162.5
SPARCAST LC 30 FF ALMSDS  Aluminum Contact; Use Limit 3100; Cast Density 162.5
SPARCAST LC 32 FFMSDS  75% Alumina High Mullite Content; Use Limit 3200; Cast Density 175.0
SPARCAST LC 32 FF ALMSDS  Aluminum Contact; Use Limit 3200; Cast Density 170.0
SPARCAST LC 32B FFMSDS  85% Alumina Bauxite Based; Use Limit 3200; Cast Density 175.0
SPARCAST LC 32B FF ALMSDS  Aluminum Contact; Use Limit 3200; Cast Density 175.0
SPARCAST LC 90 S FFMSDS  SiC Additions; Use Limit 3100; Cast Density 185.0
SPARCON 30 FFMSDS  6-8cc Loss; Use Limit 3000; Cast Density 147.5
SPARCON 32-80 FFMSDS  3cc Loss; Use Limit 3200; Cast Density 174.0
SPARCON FS 60 FFMSDS  Fused Silica; 10-12cc Loss; Use Limit 2000; Cast Density 130.5
 
Rapid Fire Castables CAST GUN PUMPABLE SHOTCRETE APPLIED
BY HAND
DETAILS
SPARFIRE 30GMSDS    7-9cc Loss; Use Limit 3000; Gun Density 139.5
SPARFIRE 30PMSDS  8-10cc Loss; Use Limit 3000; Cast Density 147.0
SPARFIRE 31 G     SPARFIRE 31G is a high strength, low-cement bonded refractory designed for dry gunning only.
SPARFIRE 32 C   SPARFIRE 32 C is a high strength, very low-cement bonded refractory designed for installation by vibration casting, pumpcasting or shotcreting. This product virtually eliminates the need for long (24 hour) curing time in the unit. Additionally, this product was designed for an accelerated dryout schedule..
SPARFIRE 32-80G     80% Alumina; 5-7cc Loss; Use Limit 3200; Gun Density 157.5
SPARFIRE 32GMSDS    75% Alumina; 7-11cc Loss; Use Limit 3200; Gun Density 161.0
SPARFIRE FS 60MSDS  Thermal Shock; Fused Silica; Use Limit 2000; Cast Density 129.5
SPARFIRE LW 60    Use Limit 2400; Cast Density 60.0; Gun Density 75.0
SPARFIRE LW 80MSDS   Use Limit 2500; Cast Density 75.0; Gun Density 94.0
SPARFIRE SC 80G     80% SiC; 8-11cc Loss; Use Limit 2750; Gun Density 149.0
SPARFIRE SC 80P   80% SiC; 7-11cc Loss; Use Limit 2750; Cast Density 160.0
 
Gun Mixes CAST GUN PUMPABLE SHOTCRETE APPLIED
BY HAND
DETAILS
SPARBOND 60     

High strength, low-cement bonded refractory designed especially for bonding to existing materials.

 
SPARBOND 80 G     SPARBOND 80G is a high strength, low-cement bonded refractory gun mix designed especially for bonding to existing materials. This product contains a unique, proprietary binding system that adheres to existing refractory while maintaining the ease of installation and superior properties of a standard low cement gun mix. 
SPARCAST 28 C/G    50% Alumina; cast/gun; 120 lbs/ft3
SPARCAST 28 ESGMSDS   Very Easy To Gun; Conventional; Use Limit 2800; Gun Density 135.0
SPARCAST 94G     Conventional; 11-13cc Loss; Use Limit 3400; Gun Density 163.5
SPARCAST ES-G     Conventional; 7-9cc Loss; Use Limit 2700; Gun Density 131.0
SPARCAST LC 30 GGMSDS    Very easy to gun low cement; Use Limit 3100; Gun Density 142.5
SPARCON 30GMSDS    Low Cement; 7-9cc Loss; Use Limit 3000; Gun Density 139.5
SPARCON 31GMSDS    Low Cement; 8-10cc loss; Use Limit 3100; Gun Density 142.5
SPARCON 32-80 G     80% Alumina; 3-6cc Loss; Use Limit 3200; Gun Density 162.0
SPARCON 32BGMSDS    Bauxite Based; 6-8cc Loss; Use Limit 3200; Gun Density 157.5
SPARCON 32GMSDS    Mullite Based; 5-7cc Loss; Use Limit 3200; Gun Density 162.0
SPARCON SC 60 G     60% SiC; 8-10cc Loss; Use Limit 2700; Gun Density 152.5
SPARCON SC 80 GMSDS    80% SiC; 7cc Loss; Use Limit 2750; Gun Density 147.0
SPARGUN 30MSDS    Conventional 60% Alumina; Use Limit 3000; Gun Density 135.0
SPARGUN 85PMSDS    Phos Bonded Hot or Cold; Use Limit 3150; Gun Density 145.0
SPARGUN LC 30Z GGMSDS    Low Cement With Zircon; Use Limit 3100; Gun Density 135.0
SPARSHOT FS PMSDS  No Activator For Hot Installs; Use Limit 2900; Gun Density 111.5
 
Plastic AIR SET HEAT SET     APPLIED
BY HAND
DETAILS
SPARPLAS 30ASMSDS   50% Alumina
SPARPLAS 50P    Phos bonded; Use Limit 3000
SPARPLAS 55PMSDS   Phos bonded; Use Limit 3050
SPARPLAS 55PCMSDS   Fine grained; Use Limit 3050
SPARPLAS 60ASMSDS   Rammed Density 149.5; Use Limit 3000
SPARPLAS 70PMSDS   Phos bonded; Use Limit 3100
SPARPLAS 70PCMSDS   Fine grained; Use Limit 3100
SPARPLAS 75HSMSDS   <10cc loss; Rammed Density 167.5; Use Limit 3100
SPARPLAS 80ASMSDS   Phos bonded; Rammed Density 170.0; Use Limit 3100
SPARPLAS 85HSMSDS   <10cc loss; Rammed Density 182.5; Use Limit 3100
SPARPLAS 85PMSDS   Phos bonded; Rammed Density 172.5; Use Limit 3100
SPARPLAS 85PCMSDS   Fine Grained; Use Limit 3100
SPARPLAS 85SP    Phos bonded; Ramming Density 172.5; Use Limit 3100
SPARPLAS 90ASMSDS   Use Limit 3300
SPARPLAS 90HSMSDS   Phos bonded; Use Limit 3300
SPARPLAS 90PCMSDS   Fine grained; Use Limit 3300
SPARPLAS 90PXMSDS   10% Cr2O3 Additions; Ramming Density 200.0; Use Limit 3400
SPARPLAS 90SPMSDS   Phos bonded; Use Limit 3300
SPARPLAS 90SPCMSDS   Fine grained; Use Limit 3300
 
Ram Mixes AIR SET HEAT SET     APPLIED
BY HAND
DETAILS
SPARAM 55    Use Limit 3000
SPARAM 60MSDS   Use Limit 3000
SPARAM 60SP    Phos bonded; Use Limit 3000
SPARAM 75 HSMSDS   Phos bonded; Rammed Density 167.5; Use Limit 3100
SPARAM 80    Use Limit 3200
SPARAM 80H    Organic Bonded; Use Limit 3200
SPARAM 85HMSDS   Organic Bonded; Use Limit 3200
SPARAM 85PMSDS   Phos Bonded; Use Limit 3200
SPARAM 90P    Phos bonded; Use Limit 3300
SPARAM 90PXMSDS   10% Cr2O3 Additions; Rammed Density 200.0; Use Limit 3400
SPARAM 90SPMSDS   Phos bonded; Use Limit 3300
SPARAM 95MSDS   Use Limit 9400
SPARAM S-4    Use Limit 2900; Rammed Density 110.0
 
Graphitic's AIR SET HEAT SET     APPLIED
BY HAND
DETAILS
SPARGRAPH 30PMSDS    50% Alumina+C Plastic; Rammed Density 148.0; Use Limit 3000
SPARGRAPH 30RMSDS    50% Alumina+C Ram; Rammed Density 148.0; Use Limit 3000
SPARGRAPH 70MSDS    70% Alumina+Graphite; Rammed Density 160.0; Use Limit 3000
SPARGRAPH 85MSDS    85% Alumina+Graphite; Rammed Density 175.0; Use Limit 3000
SPARGRAPH 85SCMSDS    75% Alumina + SiC + Graphite; Rammed Density 175.0; Use Limit 3000
SPARGRAPH 90PMSDS    90% Alumina + Graphite Plastic; Rammed Density 175.0; Use Limit 3100
SPARGRAPH 90SCMSDS    80% Alumina + SiC + Graphite; Rammed Density 175.0; Use Limit 3200
 
Mortar AIR SET HEAT SET     APPLIED
BY HAND
DETAILS
GATE MORTARMSDS   85% Alumina; Use Limit 3100
SPARSET 40MSDS   40-45% Alumina; Use Limit 3000
SPARSET 70MSDS   70% Alumina; Use Limit 3100
 
Seals & Coatings AIR SET HEAT SET     APPLIED
BY HAND
DETAILS
LADLESEAL GMSDS   75% Silica + Graphite Coating
P-9MSDS   85% Alumina Plaster; Density 165.0; Use Limit 3200
SPARKOTE 40GMSDS   65% Alumina + Graphite Coating; Use Limit 3200
SPARKOTE 90MSDS    90% Mgo Coating; Density 107.0; Use Limit 3400
SPARKOTE GMSDS   80% Silica + Graphite Coating; Use Limit 2800
SPARPLAS 55 SEALMSDS   Phos Bonded Plaster; Use Limit 3000
SPARPLAS 85 SEALMSDS   Phos Bonded Plaster; Use Limit 3200
SPARSEAL 95MSDS   Caulking/Coating Mix; Use Limit 3000
 
Dry Vibratables AIR SET HEAT SET     APPLIED
BY HAND
DETAILS
SPARFILL 82MSDS   82% Alumina; Dustless; Density 190.0; Use Limit 3200
SPARFILL 88MSDS   85% Alumina; Dustless; Density 190.0; Use Limit 3200
SPARFILL MMSDS   60% Alumina; Dustless; Density 165.0; Use Limit 3100
SPARVIBE 100DMSDS   80% Alumina + 14% SiC; Density 189.5
SPARVIBE 125D    
SPARVIBE 200MSDS   
SPARVIBE 89DMSDS   90% Magnesia; Use Limit 3400